CENTRIC ⦁ HIT - TECHNOLOGY revolutionizes the piling process by making the pile driving faster, more efficient and more powerful. This innovative technology ensures that the pile is captured exactly in the center, which means that the vibrations are transferred directly to the pile without any losses. The precise transmission of vibrations leads to significantly better energy efficiency during pile driving and increases the overall performance of the system.

A key advantage of this technology is the generation of high-frequency vibrations caused by the system's imbalance. These vibrations significantly reduce the resistance between the surfaces of the pile-driving material and the ground. Normally, the resistance of the ground slows down the penetration of the pile-driving material, which slows down the entire pile-driving process. However, the targeted transmission of vibrations loosens the soil material and significantly reduces the friction between the pile and the soil. The result is that the pile penetrates the soil much faster and with less energy. This leads to a considerable reduction in overall working time, which is a great advantage both on construction sites and from an economic point of view. In addition, the energy consumption of the entire system is significantly reduced, which also makes the technology very advantageous from an ecological point of view.

Another key advantage of CENTRIC ⦁ HIT - TECHNOLOGY is the minimization of ground vibrations. Traditional pile driving techniques often generate strong vibrations that can be transmitted to neighboring buildings and sensitive infrastructure and cause damage. In urban areas, where sensitive buildings and infrastructure are prevalent, minimizing these vibrations is of particular importance. However, centric gripping and the controlled transmission of vibrations drastically reduce the effect of ground vibrations. This makes CENTRIC ⦁ HIT - TECHNOLOGY a particularly safe and environmentally friendly solution for the piling process.

An additional advantage of the centric gripping technique is the avoidance of so-called “snaking lines”, which occur when the pile is not gripped centrically. Snaking lines lead to uncontrolled movement of the pile-driving material and can severely impair the precision of the pile-driving process. Centric gripping prevents this problem, as the vibrations act evenly and without losses on the pile. As a result, the pile remains in a stable position and is driven into the ground with greater precision and uniformity.

A decisive factor for the exceptional performance of CENTRIC ⦁ HIT - TECHNOLOGY is the low dynamic weight of the vibration housing. In contrast to conventional pile drivers, where weight plays a major role, the reduced weight of the system enables faster and more precise transmission of vibrations. This means that less mass needs to be moved to achieve the same effect, resulting in an increase in performance of at least 50 %. This increase in performance results not only in a higher speed of the ramming process, but also in a longer service life of the entire system, as less mechanical stress is exerted on the vibration housing. In addition, the lower weight contributes to a further reduction in energy consumption, resulting in long-term cost savings.

Conclusion

CENTRIC ⦁ HIT - TECHNOLOGY offers a number of advantages that significantly improve both the efficiency and environmental compatibility of the piling process. The fast and precise transfer of vibrations to the pile, the reduction in resistance between the pile and the ground and the minimization of ground vibrations and snaking lead to a significant improvement in overall performance. The reduced dynamic weight also ensures an increase in performance and greater energy efficiency. This combination makes CENTRIC ⦁ HIT - TECHNOLOGY an innovative and extremely promising solution for the modern piling process.